
October 21, 2026
Aluminium Roof Racks for Sprinter, Crafter and TGE: MWB vs LWB Fitment Guide
Roof space is the first thing most van builds run out of. Bikes, boards, panels, boxes and recovery gear all want the same real estate, and the roof is the one place on a Sprinter, Crafter or TGE that costs you nothing inside the living area.
This guide covers how the Blackridge tubular aluminium roof rack fits, the difference between medium and long wheelbase options, and how to choose solar supports and deck boards so the rack works for the way you actually travel.
What the rack is
A tubular aluminium roof rack built to bolt onto the factory roof fixing points of selected Mercedes-Benz Sprinter, VW Crafter and MAN TGE vans. It is available in MWB and LWB options, and the rails run on the standard roof rather than a raised or high roof conversion.
Because it uses the van’s own fixing points, there is no drilling. That matters more than it sounds: no holes in the roof means no leaks to chase in three winters’ time, and no paint repairs if you ever remove the rack to sell the van.
Which vans it fits
Fitment is vehicle-specific. The rack is available for:
- Mercedes-Benz Sprinter, 2006–2026
- VW Crafter, 2006–2017
- VW Crafter and MAN TGE, 2017–2026
Within those ranges, the available options depend on the vehicle and the wheelbase you select. This is the part people get wrong most often, so it is worth checking two things before you order:
- The exact generation of your van. A 2017 Crafter is a different van from a 2016 Crafter, and the mountings reflect that.
- The wheelbase. MWB and LWB vans take different racks. Measure rather than assume — the same model name has been sold with more than one wheelbase.
If you are unsure, check the product options against your vehicle’s exact year and generation before ordering. Getting the fitment right first time is far easier than exchanging a rack.
MWB vs LWB: choosing the right length
Both wheelbases are available, and the right choice is less about looks than about what you intend to carry.
Medium wheelbase (MWB)
The rack covers the usable roof area without overhanging the rear of the van. On a shorter van this keeps the front-to-rear weight distribution sensible and leaves the roof looking proportionate. For a two-person build carrying a board, a box and a couple of bikes, an MWB rack is usually plenty.
Long wheelbase (LWB)
The extra length is what you buy. An LWB rack gives you room to run a full-length solar panel alongside a roof box, or to space out bikes and boards so nothing has to be unloaded to reach anything else. If you are building a four-berth van, or you carry gear for two sports, the LWB rack is the option that stops the roof becoming a puzzle every trip.
A practical rule: work out your maximum roof load first, then choose the shortest rack that carries it comfortably. A longer rack that you never fill is extra weight and extra drag.
Solar supports: when to add them
Optional solar supports are available with the rack, and they are the single most useful addition for most self-built vans.
Fitting solar on a van roof is mostly a question of airflow and mounting. Panels mounted hard against a surface run hotter, and hot panels produce less. Supports lift the panel clear so air moves underneath, and they give you a proper fixing point on the rack structure rather than an improvised bracket.
Add solar supports if you are:
- Running a compressor fridge, an inverter or a diesel heater through the colder months
- Planning to spend multiple nights off hook-up
- Using the van year-round rather than in summer only
If you are still deciding on the electrical side, it is worth fitting the supports at the same time as the rack. Adding them later means taking the rack back off.
Deck boards and rafters
Deck boards turn the open tubular frame into a usable platform — useful for standing on while you load, for strapping down soft bags, and for keeping kit off the rails themselves.
Rafters are the cross pieces that span the rack. Blackridge offers 120mm and 240mm roof rack rafters, which lets you build the rack out to suit the load rather than accepting a fixed layout. More rafters spread the load and give you more strapping points.
Fitting: what to expect
The rack bolts into the factory roof fixing points, so the job is bolt-on rather than fabrication. There is no drilling, no sealant, and no cutting of the roof.
Before you start, check the product options against your van’s make, model, wheelbase, year and generation. Work on a level surface, and have a second pair of hands for lifting the rack onto the roof — aluminium keeps the weight down, but it is still an awkward shape to handle alone.
Torque the fixings to the specification supplied with the rack and re-check them after the first few hundred miles of loaded driving, then periodically afterwards.
Load advice
Roof capacity is set by the van manufacturer, not by the rack. Check your van’s handbook for the maximum roof load and stay within it, including the weight of the rack, panels, boards and boxes. Distribute weight evenly front to back and side to side, and keep the heaviest items low and central where you can.
A quick checklist before ordering
- Confirm your van’s make, model, year and generation
- Confirm the wheelbase — MWB or LWB
- Decide whether you want solar supports now or later
- Plan deck boards and rafters around what you will actually carry
- Check your van’s stated maximum roof load
Get those five points settled and the rest of the fitting is straightforward. If you would rather check your fitment with us first, send over your van’s details and we will confirm the right option before you order.
